Telematic Control Unit

Remove TCU

1. Step

Select Toolbox

Toolbox

Select BCM customization

BCM Customization

Click on the Telematic Control Module

Click on the button change (blue arrow) for new value

and click on the Confirm button (Green arrow)

2. Step

  • Turn Ignition OFF
  • Disconnect and remove TCU

note: Remove main fuse and follow the service manual

3. Step

  • Turn Ignition ON
  • Go to Diag4Bike -> BCM Customization->Telematic Control Unit -> Not Installed _> Green arrow

4. Step

  • Cycle ignition
  • Start Engine

note:

If engine start the proccedure is OK. -> Turn Ignition OFF

If engine not start -> Repeat the TCU Deactivation and Removal Procedure.

Kommentare sind geschlossen.