Front and Rear turn signal

.

 

Click on the button (blue arrow) for change value and button (green arrow) for confirm.

 

HyperFlash

.

When changing from incandescent to LED turn signals, the indicator light may flash fast.

Synchronization some Led turn lights, proceed as follows :

.

Pressing Hazard switch. The BCM ignores the first 8 hazard flashes and next 8 hazard flashes the BCM learns. After 16 hazard flashes are updated in the BCM.

.

If this process is not successful, try the following process:

.

Turn Ignition on, but do not start
the bike.

Turn on 4 way hazards by pressing
the hazard button on the controls.

Turn the Ignition off letting
hazards run. If the bike has security they will flash 5 or 6 times and then
pause. This is normal. They will go back to flashing normal hazard mode.

Let hazards run 1-2 minutes.

Turn Ignition back on.

Turn off hazards.

Turn Ignition off and then back on.

Check function of both turn
signals.

Les commentaires sont fermés.